Full Automatic Interfolder Facial Tissue Machine In Taiwan With
Latest Technology
Application
This ACE-V200-15L 10 Lanes Facial Tissue Machine With Full Embossing Unit Separate
Motor Driven is with both full embossing unit and edge embossing unit. It is
mainly used to automatically fold, emboss, cut and count facial
tissue papers, soft drawing nylon pack facial tissue paper,
box-drawing facial tissue papers, pop up tissue paper napkin,
interleaved tissue paper, interfolded paper towel, V fold hand
towels, nonwoven airlaid tissue, and MG paper napkins etc.
all-in-one machine It adopts vacuum folding style. The mainly
function of this machine is to manufacture commercial tissue paper
products and away-from-home tissue paper products, easy-to-take one
by one plain, embossed and LOGO printed and laminated interfolded
dispenser napkins and V fold hand paper towels. It has 10 lanes
output and can run at very high speed up to 1000 sheets per minute
per lane. The jumbo roll width can be up to 2100mm. It has 4
unwinder jumbo roll stands which are driven by separate independent
reduction motor, not chain and belt. It is an ideal equipment to
manufacture high grade away-from-home customized embossed facial
tissue paper napkin products.
Advantage:
1 Machine for box facial tissue and v fold paper towel
2 With both full embossing and edge embossing.
3 high speed up to 1000 sheet/min/lane
4 Energy-saving.
5 Vacuum fold
6 Use vacuum pump
Quick details:
1 Cylinder cutoff size: 200mm/230mm/190mm etc.
2 Steel to rubber Embossing
3 10lines
4 Interfolded and V fold
5 Soft wrap tissue with soft nylon bags and duplex box.
Technical parameters as below
| Model | ACE-V200-10L |
| Output type | 10 Lanes Facial Tissue Machine With Full Embossing Unit Separate
Motor Driven |
| Folding speed | 1000 piece/min/lane * 10lanes, depending on the paper quality and
napkin size. |
| Raw paper | 13-20g/m2 2-ply, 16-45g/m2 1-ply, wooden pulp paper or MG paper or
nonwoven airlaid. Other sizes please specify. |
| Jumbo roll size | ≤ 2100mm x Φ1200mm (Depends on your napkin size, customized) |
| Napkin size | Open size: 200±2mm x 200/165/140mm Other size, please specify. Folded size: 100±2mm x 200/165/140mm Fixed cutoff size is 200m. Other size available, please specify. or
Customized. |
| Folding type | Inter folding Vacuum fold 1/2 V fold. |
| Embossing unit | 1- Steel to rubber. (Steel to steel is available.) 2- Embossing pattern can be any LOGO, brand name, flowers etc. 3- Embossing pattern can be customized by client or recommended by
us 4- Controlled by screws, mechanical pressing type. Cylinder type is optional. |
| Printing unit | Optional 1- Flexo printing type. 2- Printing colors customized up to 4 colors. 3- Printing Logo is changeable. You just need to change the Printing
Rubber only. 4- Anilox printing roll. Ceramic anilox roller. 5- Printing roll is adjustable. 6- Ink printing system to be negotiated. 7- With doctor blades. 8- Closed chamber ink circulating system. |
| Point to point Lamination system | Lamination system is optional. a. With 2 complete sets of point to point lamination units. b. The whole design is copied Italy design. c. Heavy chrome coating roll d. Micro-adjustment of nips between the steel roll e. Anilox roll for glue applicant. f. Controlled by cylinders g. Each lamination unit controlled by an independent reducer. When
the machine stops, the motor will start running to rotate the
anilox roll to prevent it getting dry. |
| Tension control | Speedless Tension control unit to fit the machine for paper of
different quaity and different gsm. With automatic web guiding system. With automatic web tension control system. |
| Calendar unit | Make the napkin softer. |
| Counting | Automatic counting unit |
| Emergent stop | Emergent stop unit to inspect any paper breaks, paper jams. |
| Paper feeding | Synchronizer for feeding paper |
| Power | 7.5Kw for main motor 18.5KW for vacuum pump (3-phase AC380V 50Hz or customized) |
| Machine size | 6x2x2m |
| Weight | 6T |
| Videos and photos available. |
F. Laminating unit
a. With 2 sets of lamination units.
b. The whole design is copied Italy design.
c. Heavy chrome coating roll
d. Micro-adjustment of nips between the steel roll
e. Anilox roll for glue applicant.
f. Controlled by cylinders
g. Each lamination unit controlled by an independent reducer. When
the machine stops, the motor will start running to rotate the
anilox roll to prevent it getting dry.
G. Printing Section (advanced design.)
1. With 2 colors flexo-graphic printer section.
2. Printing unit with driven by timing belts to make printing more
precise.
3. Simple and easy adjustment of horizontal and longitudinal
registration by turning hand wheel.
4. With automatic printing roller disconnection device during
machine stop. If the machine stops, the roller will automatically
disconnect with the printing unit, controlled by pneumatic system.
5. The printing plate roller can be adjustable or disassembled from
the printing unit, much easier for the operator to attach the
printing rubber plates or clean the roller.
6. Both sides of Anilox roll & Rubber roll with buffer for
anti-spill cover to stop the ink spilling out of the ink tank and
spraying somewhere.
7. The printer is equipped with cover on the in tank to prevent the
inks spilling out of the ink tanks.
F. Laminating unit
a. With 2 sets of lamination units.
b. The whole design is copied Italy design.
c. Heavy chrome coating roll
d. Micro-adjustment of nips between the steel roll
e. Anilox roll for glue applicant.
f. Controlled by cylinders
g. Each lamination unit controlled by an independent reducer. When
the machine stops, the motor will start running to rotate the
anilox roll to prevent it getting dry.
Configuration:
| Bearings | NSK |
| PLC | Siemens |
| Inverter | Siemens |
| Touch screen | Siemens |
| Auto web guide | Italy Best |
| Auto tension system | Like |
| Steel | High Speed steel |
| Anilox | Ceramix |
FAQ
Q: Are you trading company or manufacturer
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
60-90 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
Finished products by this Full Automatic Interfolder Facial Tissue Machine In Taiwan With
Latest Technology:
